

enlarge

enlarge

enlarge

enlarge
ELT500AWT
Availability: Yes
|
The Enermax Liberty DXX is the
perfect all around PSU for average gamers. It features a 22A output for each of
the +12V rails for maximum power delivered to your graphic cards and CPU. This
power supply is equipped with the latest 8P PCI-E 2.0 connectors so you can run
the latest video cards on the market. All this packed in solid body and a quiet
120mm fan for superior airflow and topped off with a full set of modular cables.
For more information, please visit
Enermax's product page.
|
|
Features |
|
|
|
- Input: 95-264V
- Total Power: 500 watt
- Meets INTEL ATX 12V 2.2 standard for ATX- and BTX systems
- Full compliance with the highest standard to desktop power requirements. Split
12V rails provide most stable current to CPU, GPU, MB and drives
- Full support of Dual Core systems (incl. Pentium D EE and Athlon 64 X2) & Dual
CPU systems
- Convertible design to power up ATX/BTX systems and support dual CPU
entry-level server/workstation
- High efficiency of about 80% under wide load range (30-100%) minimizes your
electricity bill
- Special design 12 cm fan combines silence and cooling by intelligent speed
control
- Protected by OCP (Over Current Protection), OVP (Over Voltage Protection), UVP
(Under Voltage Protection), OLP (Over Power Protection), SCP (Short Circuit
Protection) and OTP (Over Temperature Protection) for maximum safety.
- Full rated power under 0-40°C/32-104°F ambient temp.
- Smarter cable choice and better cable routing for a neat and tidy case
- Unique 4-pin Molex + SATA connectors in pairs give you free choice on using
either PATA or SATA devices
- Support of Dual PCI-E graphic cards, SLI or CrossFire
- Toughest EMI shielding protects your system and near-by appliances
- Active PFC (value 0.99)
- Dimension: 150 * 85 * 140 mm
- 3 years warranty
|
|
Specifications |
|
|
|
Power: 500W (supports both
20pins and 24pins DUAL CPU motherboards)
Efficiency: 80%
Active PFC: Yes
Input Voltage: 90V~265V (Auto Adjusted)
Input Frequency Range: 47Hz~63Hz
Input Current: 40A/115V and 80A/230V max. during cold start
Hold up time: 17ms at 115VAC or 230VAC, full load
Over Voltage Protection: +5V: 5.5V~7.0V; +3.3V:3.76V~4.3V; +12V & +12V2:
13.4V~15.6V
Over Load Protection: 110~160% of max load
Over current Protection: +3.3V : 55A (max); +5V: 48A (max); +12V1 & +12V2: 20A
(max)
Over Temperature Protection: Operating Ambient 10ºC~40ºC, Storage Ambient
-40ºC~70ºC
Humidity:
Operating : to 85% relative humidity, non condensing at 25ºC
Storage: to 95% relative humidity, non condensing at 50ºC
MTBF: Greater than 100K hours at 70% of full rated load; 230VAC / 50Hz input;
25ºC ambient
EMC: EN55022 Class B, EN61000-4-2 Class B, EN61000-4-3 Class A, EN61000-4-4
Class B, EN61000-4-5 Class B, EN61000-4-6 Class A, EN61000-4-8 Class A,
EN61000-4-11 Class B, FCC Part 15 & Part 2, CNS 13438 Class B
Safety: Approval UL, cUL, TÜV, CB
Dimension: W150 x H86 x D140 (mm)
|
Rails
|
ELT400AWT |
|
+12v1
|
22A
|
32A
combine pw
|
|
+12v2
|
22A
|
|
-12v
|
0.6a
|
|
+5v
|
30A
|
|
+5v sb
|
3A
|
|
+3.3v
|
28A
|
|
|
|
|