Toll Free: (866) 989-2970
Ebay Store: (877) 757-3863
Hours: M-F 10AM - 6PM (PST)

Céramique 2.5g High Density Thermal Compound by Arctic Silver







Cables & Adapters

IDE/Floppy Cables

SATA Cables

Wire Management

Power Supplies

CPU Coolers

VGA Coolers

Water Cooling

Chipset Coolers

VRM/Memory Coolers

HDD/SSD Coolers

Thermal Compounds & Pads

Case Fans

Fan Controllers

Quiet PC

Water Cooling Kits

CCFL/LED Lighting

Case Accessories

Input/Audio Devices

Storage/USB Adapters



Hot Deals

New Products


Home > Hot Deals > Céramique 2.5g High Density Thermal Compound by Arctic Silver


Click to enlarge - Céramique 2.5g High Density Thermal Compound by Arctic Silver

Céramique 2.5g High Density Thermal Compound by Arctic Silver

Price: $2.49
Availability: Ships same day before 2:00PM

Buy now
To calculate your shipping charge, please add the desired quantity to your cart.

Free Shipping only applies to items that qualify for free shipping. Only valid when shipping to lower 48 states.

This high-density, ceramic-based thermal compound is specifically designed for modern high-power CPUs and high-performance heatsinks or water-cooling solutions.

Made with micronized aluminum oxide, boron nitride and zinc oxide.
Céramique uses a high-density layered composite of five unique shapes of thermally conductive aluminum oxide, boron nitride and zinc oxide sub-micron particles to maximize particle-to-particle contact area and thermal transfer.

This exclusive combination provides performance exceeding most metal based compounds.

Controlled triple phase viscosity.
Céramique does not contain any silicone.
The suspension fluid is a proprietary mixture of advanced polysynthetic oils that provide superior performance and long-term stability.

During the system's initial use, the heat from the CPU lowers the viscosity of the compound to enhance the filling of the microscopic valleys and ensure a minimum bond line between the heatsink and the CPU core. Then the compound thickens slightly over the next 100 to 300 hours of use to its final consistency designed for long-term stability.

(This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Ceramique goes through are much more subtle and ultimately much more effective.)

Céramique is engineered to not separate, run, migrate, or bleed.

Electrical Insulator.
Céramique does not contain any metal or other electrically conductive materials. It is a pure electrical insulator, neither electrically conductive nor capacitive.

Temperature Limits.

Peak: – 40°C to > 180°C

Long-Term: – 40 to 140C

* 2 to 10 degrees centigrade lower (at CPU full load) core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.

Céramique can easily be cleaned from CPUs and heatsinks with isopropyl alcohol or any of the cleaners listed in the product instructions.

Click here for Mods Synergy's review.


Visit our sister site, Auction BDI: Live Tech Auctions!

Check out the HOT DEALS in our CLEARANCE section

SVC features 128 bit encryption for ultimate security

Home    View Cart    About Us    Store Policies    Contact Us    Site Map